Finaly

If you check back a few entry's you'll find the post with my gif in it. After 3/4 days of it processing I gave up. The help page said it should only take a couple Min's . Something must have gone awry.

Here are a couple shots of Loweko of the LowRiders. I touched up where I took off her old head and chains, drilled a new pinning hole (the old one was way off) and added this new head. I think it was off the Ganger with the grenade in one hand but whatever it was I had drilled it out years ago for something else. anyway, nice face. I plan to give her a full head of short dreads and some twigs tied in all tribal like.

Oh I added some bullet holes to the chainsword which turned out quite nice. The pin in the back of the head is to help attach the hair later. I have no idea where I'm going to add her stub gun but she'll have one.







Here is my first attempt at making a mould. I learned a lotta lessons with this:
bottle caps do not make great mold holders
Bases melt in the over... hard
plastic mini's also don't like the oven
I need to cook my SuperSculpie lower than 130 so it doesn't crack

I haven't tried using the mould yet but I will with both epoxy and resin, if i can. i need to find some tiny metal trays to hold it in. I was thinking about the ones those cheap ass candles come it but there still a little big. Maybe i can cut them down *ponders* anyway that's all for this post, my gaming days are Monday, Wednesday, Thursday and Sunday so i don't often get much sculpting dune then. soon tho.

acting my mental age

Been A busy weekend, so no more scratch sculpting. I did do a little more on my new Gang Leader (loweko) of the notorious "Low Riders". Clever name eh? thought of it all by myself. As you can see she is going to be a chainsword wielding badass!







She started as a Sister repentia (she pretty much still is ^^) and now i've taken some of the hilt off the chainsword. Loped off that crappy hooded head (im thinking i might give her a balaclava like those old skool cowboy bandits and hair like the awesome ranger looking woodelves. I've grinded down the sack on her front foot and will replace it with armor like on the back foot. i also filed off the inquisitor symbol on her leg. Took the chains off oher back that were attached to that horrid hood.




As promissed a pic of the dried mask. You cant see from here but the poll set at an angle which i was more than a litttle peeved with but no one else seemed to care. It also wasnt dryed in time which is part of how it got set at a funny angle. Its gunna be broken down into mask, poll and mount, left to dry and then put back together more securly. A note to all those that mean to use air drying clay. The night before you need it, is too late to start sculpting!






And here is me as "kid from the fair".







And here is me as "kid from the fair who was told to stand still coz his last pik came out blury". I know which one I prefer

Costumes

Firstly the elbow pad. Sis started just wanting me to make up an armature for it but the quickly turned into finishing it too. it was a lot harder than i thought it was going to be. fimo is an ass to work with. Gave me a whole new respect to the girls that make thouse lil cake jewlery pieces.















This guy started as a card mask and a huge lump of air drying clay. My first dilema was the clay not sticking to the mask. I solves it by coating the mask in PVA glue and sticking a thin layer of clay over it. Might as well have had no feachers.


The design is based off that wacky guy in that old stop animation with the kids and an airship? I have no idea what its called and that is the worst description of it ever but there you go.


Here is the finished result. Well, wet finished result. Its still under a lamp drying beside me. Starting to worry that it wont be dry in time. wanted to keep the lamp on it over night but the wife was paranoid that it would get too hot and spontaniously combust *shrugs* anyway. hopefully it will dry soon and maybe i'll take some more shots.

Spinny Spinny

Ok, still dont know if this is going to work, but it might. Its a gif of the mystery mini spinning. It might not look like it but I've added a 1.5" cube's worth of ProCreate. I dont think I emphasized enough just how much epoxy these minis are going to take. If I was using packets of GW Greenstuff... I'd say it would take around 10-15 more packets to finish... maybe more. I guess I'll find out XD that would be one expensive mini :P no wonder ppl use supersculpy. I bet its barrels cheaper on mass.

Havent done much more on these guys as I've been working or the armor parts to my sisters tifa costume and i've made my friend a Masquerade Mask for a costume party saturday. I'll upload picks for of me making then in my next entry. Dont wanna do anything too risky incase it kills this gif.

Almost Spinny

Todays post had been postponed untill i can figure out why the hell it wont upload my giff :(

Mr Tree and mystery

zomg, missed a whole day. shame on me. did a little more on the old Treant. i think it came out real well ^^ totally loveing how the branches came out. wont be able to do any more on him for a while tho as im thinking to get the thinner brances at the top i should solder some single thicknesses of wire. onlyproblem being that i lost my soldering iron a long long time a go so need to get a new one. but my car is in the garage after some (a lot) of hissy fits.


Mystery mini!

He's also ging to be a slow one. he's going to take a lotta procreate to finish so im just useing any i make up extra to blob on him so i dont waste any. its not expensive but i aint made o money. Keeping him in a decent pose is caseing me serious headache. and he has one long calf, one long shin (not on the same leg >.>) and one long arm. so that's gunna be fun to fix. He's totally built tho so i have jut gotta thicken him up on the right side's and that's half the battle won


my last blob gave him a sweet ass. you know you love it

All the CC you can handle

Havent seen her in a long time eh?
And now she has a shell. I'm trying to work throu her logically so i started with the back shell first. This procreate is awsome for large pieces but im struggleing with adding little pieces as you'll see later.




couple shots of the shell from the back. which is nice as thats the main bit i was sculpting XD turned out well i thought. Least this side did >.>






Oh noes! This sides didn't match :O so i chopped it down a bit as i had the edges of the shell raised.









I think the re sculpt of this side turned our pretty good ^^ A lot more even at least.












And Then on to the front shell. i have a horrible feeling I'm going to have to do a lot of adjusting as i go with CC. Every time i adjust one bit and add a lil detail, it throws out something else. Luckily its only been unfinished bits so far ^^ Hope that this is the way it usually works XD



The front piece looked too short so i extended it down. I also remade the front claws and haven't re attached them yet as i think there position is going to have to be scooched down. i had real trouble getting this little edge i added to stick to the rest O.o i wonder if i need to change my mix? or maybe just use greenstuff
. I've never had any figure sculpting lessons so this is all guess work and what i have assumed from looking as pictures of other sculpts. I don't learn so good from books. My ability to learn is all visual which is probably why i do a lot of crafts and arty things. Anyway, i think CC is really coming along now ^^ you, or at least i can defiantly see who it is.